It is used for bending of meshes i.e. forming them into different shapes (for fences). With our tools we can work on up to 4000 mm of length and up to 70T of force. The shape of the tool is determined by the customer. Machine is delivered with the limiter programmed for specific length. Maximum wire diameter is 8 mm. This tool is mad to order depending on the wire diameter.
They are used for cutting of meshes and are installed behind the mesh welding machine. Deliverable widths are 1500-4000 mm, and the wire thickness can be up to 12.
Operation: hydraulic and automatic with an option for remote control.
It is used for brushing and cleaning the wire from remaining slag and is placed behind the breaker, directly under the calibrating machine. Machine holds six steel brushes sized 250x50 mm on electromotors. Brushes are placed in such a way they encompass the entire circumference of the wire. It is controlled by the use of controller. It is possible to adjust the pressure of the brushes on the...
Used behind the unroller and before the cutting and calibrating machine. It is used for breaking of the wire and removes 90% of slag from the steel wire. The wire passes through when moving guides are vertical and after the wire is pulled in they are turned as needed (see figure). This allows for 2x1800 breaking of the wire in small space. Broken away slag is collected in lower drawer and can...
The unroller is used for unrolling of wire form a wheel into the machine that processes it. The height of the spinning axle is 2800 mm and maximum load is 3T in working condition. Spinning axle is vertical and can be lowered into horizontal position, using hydraulics, in situations when wire wheel needs to be placed by way of a forklift. Axle has a groove for the fork, and it automatically...
- We make 2 machine families:
- Machines for production of construction mesh and
- Machines for production of precise mesh (e.g. fences, sheets etc.)
Accuracy of the construction mesh machine is ± 10 mm for 6 m of length, and machines for fences ± 1mm for 6m of length. Production feed for the network is pneumatic, i.e. with AC servo engines. Welding is done with pneumatic...
- « first
- ‹ previous
- 1
- 2
- 3