Spot welding machine VM 75 (electro-resistant welding) 75KVA-pneumatic with a special tool with 4 points at one time
- connection voltage: 400V
- power: 75KVA
- primary current: 187.5 A
- required fuse 200A, meltable
- a 4x16 copper wire is required
- minimum sheet thickness: 0.1 + 0.1mm steel
- maximum sheet thickness: 6 + 6mm steel
- maximum thickness of stainless steel: 6 + 6mm
- maximum thickness of the aluminum: 1.5 + 1.5
- cooling: water, built-in
- electrodes are from "Elmedur X"
- clamping distance: 600mm
- electrode pressure: pneumatic
- electrode motion: straight
- air consumption: with a pressure of 6.3bar is 60l / min
- electrode stroke: 50mm
- the following parameters are set:
- black plate or galvanized material
- automatic or semi-automatic mode
- demo program (everything, except for welding, used when setting)
- pre pressure time
- welding time
- welding power
- after keeping after welding
- separate program for galvanized plate
