Radnoti Mikloša 27/A, 24000 Senta, Srbija

Products image

Machines for wire welding

Semi automatic machine line for producing pipe fences

This machine line produces paneled bars and grids made of thin steel tubes and stainless steel materials. Electrodes can be replaced. The shape of the electrode can be shaped according to the desired product. The length of the panel can be up to 4 m. The height is maximum 2 m, but we also produce machines of different sizes.

Straightening machine
    Technical information:
  • Voltage: 3x400V
  • Installed power: 12 kW
  • Diameter of wire to be straightened: Ø 4mm to Ø 12mm
  • Maximum straightening speed: 1m/s
  • Working speed: 300 to 600 mm/s
  • Scattering at speeds of 100 and 300 mm/s +- 0,5 mm; at speeds of 300 an 600 mm/s +-1,5 mm; at speeds of 600 and 1000 mm/s +-4 mm

It is installed beneath the press and behind the scissors, in that way the production line is fully automated. Manipulator moves the mesh from scissors to press. Places the mesh beneath the press and when the press finishes its work, removes the mesh and moves it to the baling spot. Number of meshes in a bale is programmed and cannot exceed 100.

It is used for bending of meshes i.e. forming them into different shapes (for fences). With our tools we can work on up to 4000 mm of length and up to 70T of force. The shape of the tool is determined by the customer. Machine is delivered with the limiter programmed for specific length. Maximum wire diameter is 8 mm. This tool is mad to order depending on the wire diameter.

They are used for cutting of meshes and are installed behind the mesh welding machine. Deliverable widths are 1500-4000 mm, and the wire thickness can be up to 12.

Operation: hydraulic and automatic with an option for remote control.

Mesh spinner is used for welding, spinning and baling of mesh. It consists of carrying desk, unit for placing the mesh onto the rotating table, rotating table, unit for placing the mesh that was not turned, unit for stacking of meshes and a unit for mesh removal. This machine is fully automated and does not require a special worker for operation.

It is used for brushing and cleaning the wire from remaining slag and is placed behind the breaker, directly under the calibrating machine. Machine holds six steel brushes sized 250x50 mm on electromotors. Brushes are placed in such a way they encompass the entire circumference of the wire. It is controlled by the use of controller.

Welding slag breaker

Used behind the unroller and before the cutting and calibrating machine. It is used for breaking of the wire and removes 90% of slag from the steel wire. The wire passes through when moving guides are vertical and after the wire is pulled in they are turned as needed (see figure). This allows for 2x1800 breaking of the wire in small space.

Wire unroller

The unroller is used for unrolling of wire form a wheel into the machine that processes it. The height of the spinning axle is 2800 mm and maximum load is 3T in working condition. Spinning axle is vertical and can be lowered into horizontal position, using hydraulics, in situations when wire wheel needs to be placed by way of a forklift.

Machines for mesh welding
    We make 2 machine families:
  • Machines for production of construction mesh and
  • Machines for production of precise mesh (e.g. fences, sheets etc.)