- voltage: 400V
- open circuit voltage: (AS 35-4.5V), (AS 50-6V)
- primary current: AS 35 88A-impulse; AS 50 125A-impulse
- arm length: 350-700 mm or as agreed
- circular electrodes are replaceable
- minimum pipe diameter: 120mm
- maximum pipe diameter: 1000mm
- power on top electrode
- closed cooling system with cooler is installed
- control by way of microcontroller, parameters are programmed
- communication through two line display in Serbian
- continual regulation of current and speed of circular electrode
- welding pulsar is installed, it regulates width of current impulse, strength of the impulse and the duration of the break
- minimum tin thickness: 2x0.3mm
- maximum tin thickness: AS35 2x1mm; AS 50 2x1.5mm – steel and stainless steel
- welding speed is regulated and can be 0-30sec depending on the material thickness
- necessary fold width 6-10mm
- electrodes are made from Elmedur-X
- upper head turns at 900 and it can be used both as a longitudinal and circular welding device
- the device is delivered with one set of tools, for circular or longitudinal welding
- a second set of tools can be ordered separately, additional installation is possible at surcharge